|
Quick-Connect (vented and non-Vented) cables -- Ultra Rugged!
Available in custom or standard lengths (see standard price list for part numbers and details).
For use with miniTROLL® and Multi-Parameter TROLL® 9000.
Download a spec sheet
Desiccants
High-humidity? No problem. Choose either the desiccant cap with integrated hydrophobic membranes (standard) or the MAXUM high-volume desiccant cartridge--attaches to Quick-Connect cables!
 |
 |
Desiccant with integrated hydrophobic membrane
Includes 10 per pack |
 |
|
|
Cable Reels
Recommended for cable lengths 100’ (32 meters) or greater, In-Situ® offers field-proven robust reels for cable management. These reels have been used successfully for many years in In-Situ®’s popular rental pool.
Wellcaps, Docks & Sleeves
No more duct tape, baling wire or accidental crimping of the vent tube. Well docks and sleeves are the easiest, no-hassle way to suspend TROLL® and PXDs in the well. Standard 2" (5 cm), 4" (10 cm) and 6" (15 cm) diameters. The sleeve holds the dock in place when the wellcap is off. Upon completion and removal of the sleeve, In-Situ®’s vented well-caps slip over the top of the dock and casing (locking models available for sites with security issues).
 |
|
2" Well Dock
4" Well Dock
6" Well Dock |
|
|
|
 |
|
2" Well Dock & Sleeve
4" Well Dock & Sleeve
6" Well Dock & Sleeve |
|
|
|
 |
|
2" Vented Well Cap
4" Vented Well Cap |
|
|
|
  |
|
2" Vented locking well cap
4" Vented locking well cap |
|
|
|
 |
|
Cable Holder |
|
|
|
 |
|
|
MiniTROLL® Maintenance/Accessory Kit
The miniTROLL® Maintenance Kit includes a mixture of all Elastomers, O-Rings, Desiccants, Dust-caps, Well Docks, etc. necessary to properly maintain and help deploy the miniTROLL®.
 |
|
MiniTROLL® Maintenance/Accessory Kit |
|
|
|
Extended Warranty
The miniTROLL® comes standard with a 1-year warranty however the warranty can be extended up to three additional years.
|
PSIA (non-vented) miniTROLL®
|
PSIA Snap Ring Kit
This kit is needed for removal and subsequent re-insertion of the battery retention snap ring on the absolute miniTROLL®. The battery retention snap ring positively engages the battery during data transfer on the absolute miniTROLL® used with a Stainless Steel backshell. A snap ring is included in all (Absolute) miniTROLL®'s, but the customer will need the kit to service the battery.
 |
|
PSIA Snap Ring Kit
Includes: 3 Snap Rings, Removal Tool, Insertion Tool |
|
|
|
 |
|
Teflon®-coated, Stainless Cable, 150ft (16m)
Includes 150’ 1/16th inch (16 m/1.6 mm) wire, spool and 2 clamps |
|
|
|
 |
|
Direct read non-vented cable
Includes 150ft 1/16th inch (16 m/1.6 mm) wire, spool and 2 clamps
Available in custom or standard lengths |
|
|
|
|
|
|
|
Multi-Parameter TROLL® 9000
|
Calibration Solutions
In-Situ® calibration solutions are prepared as called out by the Standard Methods reference. A "Quick-Cal" Solution is offered which combines DO, Conductivity, pH & ORP in one convenient quart (liter) bottle.
 |
|
"Quick-Cal" Solution, 4-Pack (250mL X 4)
DI Water
DO Filling Solution
DO Membrane
Conductivity Cal Solution, 147 uS, Quart
Conductivity Cal Solution, 1412 uS, Quart
Conductivity Cal Solution, 12,890 uS, Quart
Conductivity Cal Solution, 58,670 uS, Quart
pH Cal Solution, pH 4, Quart
pH Cal Solution, pH 7, Quart
pH Cal Solution, pH 10, Quart
ZoBell's Solution (ORP), Quart
Nitrate, 14 ppm as N, Quart
Nitrate, 140 ppm as N, Quart
Nitrate, 1400 ppm as N, Quart
Ammonium, 14 ppm as N, Quart
Ammonium, 140 ppm as N, Quart
Ammonium, 1400 ppm as N, Quart
Chloride Cal Solution, 35.5 ppm, Quart
Chloride Cal Solution, 355 ppm, Quart
Chloride Cal Solution, 3545 ppm, Quart
Chloride Calibration Solution 0.1M, Quart |
|
|
|
Stirrer
|
|
|
Laboratory-quality Stirrer for TROLL® 9500
|
|
|
|
|
|
|
|
|
|
